Amico SSM Monitor Arms (Side to Side) User Manual download pdf (Page 12)

9 Amico Accessories

Section 3: Monitor Installation

Mounting adapter

Monitor dependant hardware

Monitor

Front of the

mounting adapter

(Figure 1) (Figure 2)

Mounting shelf

1. First install the mounting adapter to the device (Please refer to the adapter installation manual provided with the

adapter)(Figure 1 on previous page).

2. Loosen the plastic screws on the bottom side of the mounting shelf. Pull down on the plunger lock at the bottom of

the mounting shelf and twist it to keep it open. Slide the adapter laterally onto the mounting shelf until the plunger

aligns with the clearance hole at the front of the mounting adapter. (Figure 3)

3. Release the plunger and tighten the plastic screws by hand (Figure 4).

Plunger Lock

Plastic Screws

Front of the shelf

5’’ mounting shelf is shown above

(Figure 4)

Plunger pulled

Plunger released

Mounting shelf

(Figure 3)

WARNING: Ensure the mounting shelf is securely locked and horizontal to prevent the monitor from sliding and

falling. (See Page 16)

WARNING: On the bottom of the mounting shelf there is a plunger that secures the shelf to the mounting

adapter. Simply pull down on the plunger, align the adapter plate with the shelf and release the plunger once

positioned over the clearance hole (Figure 3).

NOTE: The plunger can be locked in the open position by pulling and twisting it.

Monitor Shelf: 3” Top/Back Mount, 5” Top/ Back Mount and VESA

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

No comments

Amico SSM Monitor Arms (Side to Side) User Manual Page 12