Amico Condor Adjustable Height Channel User Manual

CorporationCondor Manual

10 Amico Accessories Inc.The following mounting congurations are recommended for safe mounting on CondorSECTION 4: EQUIPMENT INSTALLATION Equipm

Both Monitor and Keyboard on 9" x 9" (22.86 cm x 22.86 cm) SSM ArmIt is advised to mount CPU near top left of Condor; with power and data ou

Mounting of accessories to the mounting channel can be done by mounting the accessories to an adapter rst. WARNING To prevent the adapter from slidi

MOUNTING OF ACCESSORIESFigure 54. Once the accessory is at the desired height, tighten all four set screws to the tightest possible position on the

WARNING Do not over-rotate the counterbalance bolt. Once you feel resistance, stop. Forcing the bolt will damage the internals of the Condor

Cable Requirement for CPU Mounting on TopCable length minimum: 10 feet (304.8 cm), maximum number of cables: 5 Cable Routing ProcedureNOTE: All access

TroubleshootingCondor Mounting Channel is Drifting Upwards or DownwardsCounter-balancing mechanism is not set appropriately for the given load.•  Coun

Preventative Maintenance WARNING The Condor requires periodic inspection and maintenance to perform optimally and achieve maximum operation lif

AHC-1-L1-K1-C2•  Includes 12"x12" (30.48 cm x 30.48 cm) LCD SSM arm – provides tilt, articulation and swivel•  Includes 12"x12" (3

WARNING The cleaning chemicals and methods below are not meant for controlling any infections. It shall be the responsibility of the hospital

2 Amico Accessories Inc.PREFACE IMPORTANT, PLEASE READ CAREFULLYThank you for your purchase with Amico Accessories Inc.This unit is designed for

ACC CONDOR MANUAL 18.09.2014www.amico.comAmico Accessories Inc. | www.amico.com 85 Fulton Way, Richmond HillOntario, L4B 2N4, Canada71 East Industry C

www.amico.com 3CONTENTS Section 1: Product Specications 4Features 5-6Section 2: Installation Preparation 7Installation, Tools and Part Req

4 Amico Accessories Inc.SECTION 1: Product SpecicationsHeight: 45"/114.3 cmWidth: 12"/30.5 cmThickness: 3"/7.6 cmVertical motion

www.amico.com 5•  Used for mounting monitors and keyboards on Amico SSM Arms to provide vertical adjustment•  Counter-balanced to provide

6 Amico Accessories Inc. 27.00 (68.58cm) 43 (109.22cm) 2.00 (5.08cm) 27"(68.58cm) Clearance Needed for 12" Double Arm, SSM-LCD-15 (Sho

www.amico.com 7Installation, Tools and Part requirementsTools required: •  Drill•  Drill bit size 9/64" (0.35 cm)•  Drill bit size ½&

8 Amico Accessories Inc.Mounting Preparation The Condor comes with a set of channel covers. Remove the central channel cover to expose all 7 wall

www.amico.com 9Mounting on hollow wall:1. Locate and mark the top mounting hole at a distance of 69"/168 cm from the oor for a congur